I finally got around to building my inav FT arrow. I'm running a modified inav 2.4.0 that supports SRXL2.
My setup:
ESC: FT 20A with 3A UBEC
Motor: FT Radial 2205 2300kv
Prop: 6030
Servos: 2 x Emax ES9051 Digital
Battery 3s 850mah Lipo
GPS: RMRC UBLOX M8N GPS
Flight Controller: Matek F405 Mini
Camera: Runcam Micro Swift 3
Receiver: Spektrum SPM4650 DSMX Serial
Video Tx: Immersion RC Nano Tramp
Antenna: VAS Minion Antenna w/ u.FL Connector
It really helped to add the packing tape and colors while the foamboard was flat. I also remixed this
3D printed pod to make it lighter
here.
I was able to maiden it this afternoon and it flies fantastic. If you have never seen inav auto launch you are in for a treat!
Ricky