@Zetoyoc @Stonewall @BATTLEAXE
Fourth try and finally my P-47 flies
I replaced the receiver with another one and put the receiver to another location. The elevator had too much strain on the servo. I cut the connection between the elevator and horizontal stabilizer. May I put too much clue there to make it resistent. And after that I taped the elevator to the horizontal stabilizer back again. That reduced the strain on the servo a lot.
Additional I added wooden sticks at the bottom of the elevator to keep both sides in sync.
Here the pictures of the modification:
View attachment 154558
View attachment 154559
Now my P-47 flies okay.
The plane does not need much power. While increasing the throttle the plane goes up. On 4s the plane needs not much thrust and power to fly.
Even with wind I was able to land the plane controlled.
Now I can start with to build the canopy and do the paint job
There is a great looking painted version of the P-47 on Youtube. I would love to have my one half that nice:
Flite Test Master Series P47 Mods and Ugrades.