FT P-47 v1.0 Addendum

FT P-47 v1.0 Addendum 1.0

SP0NZ

FT CAD Gremlin
Staff member
Admin
Moderator
Mentor
SP0NZ submitted a new resource:

FT P-47 v1.0 Addendum - Update to part 15 for the P-47 v1.0 plans

** FT P-47 Plans Addendum **
Part 15 on the FT P-47 version 1.0 plans was actually a part from a different model. Flite Test sent me the correct file and I'm working to update the full plan set to version 1.1. In the meantime, here is the correct part for those working from the version 1.0 plans.

Read more about this resource...
 

Prowler901

Junior Member
Hi Sponz,
You may also want to look at the battery box part. One side is too wide and this makes the box "out of square". This also causes fit issues with the formers that go over it.
 

Attachments

  • FT_P-47_01.jpg
    FT_P-47_01.jpg
    119.4 KB · Views: 0
  • FT_P-47_02.jpg
    FT_P-47_02.jpg
    93.9 KB · Views: 0
  • FT_P-47_03.jpg
    FT_P-47_03.jpg
    107.9 KB · Views: 0