FT Piggy Accessory Challenge

[Jo's squadron]

@Noah - Flite Test I have 2 questions
#1- can we reserve our ideas (e.g. I wanted to make some huge eyes could I say ''making some huge eyes-reserved'')?
#2- If I come out with a farmer pig (for e.g.) that has a a hat and some pants and all, I release all the files and then someone comes along and thinks ''I can make a better farmer pig'' then all of my efforts are lost IF that person makes a better farmer pig.
So what I suggest for #2 is that once our design, STL, plans etc are released they cannot be copied.
Does that sound reasonable? let me know what you think.

 

[L Edge]

@Noah - Flite Test :
You list the Little Piggy weight as 531 grams at the store.
Looking for the individual weight ready to fly for Little Piggy and individual weight of the wing minus the 2200 battery.

Thanks

 

[CRASH 22]

My FT little piggy came in the mail today
Hopefully, we’ll have it finished in time for Flite fest.

 

[CRASH 22]

I also purchased the accessory package with it










This will be my first time using the Aura 5
(glad it’s pre-programmed)
Lol

 

[CRASH 22]

I also got some extra props
And a side of markers

 

[uberjay]

Well... it's not officially intended to fly, but it IS an accessory.

My intention was / is to print as many of these little badges as possible in the next week and a bit and bring them to Flitefest to give to the New Pilot experience tent to give them away to anyone who signs up for a lesson.

That said, there's not stopping anyone from printing their own at any size and gluing it onto their flying pig!

Actually, if anyone else wants to print some and bring them that would be awesome! I'm not sure how many I can get printed between then and now. (Files attached)

Here's my entry @Noah - Flite Test

Thanks,
Jason Uberig (aka Uberjay)

 

[Noah - Flite Test]

@Noah - Flite Test I have 2 questions
#1- can we reserve our ideas (e.g. I wanted to make some huge eyes could I say ''making some huge eyes-reserved'')?
#2- If I come out with a farmer pig (for e.g.) that has a a hat and some pants and all, I release all the files and then someone comes along and thinks ''I can make a better farmer pig'' then all of my efforts are lost IF that person makes a better farmer pig.
So what I suggest for #2 is that once our design, STL, plans etc are released they cannot be copied.
Does that sound reasonable? let me know what you think.

Good question,
1# What I would say is if you are working on something like "huge eyes" you may announce it that you are making them and that will allow everyone to know what you are working on. This will allow as little duplicate element as possible.
2# We can't stop the community from designing the same accessories /ides but one of the winners will be for best original design. So if you make an awesome farm pig and someone else makes another one you still have a chance to win the $100 gift card.

 

[Noah - Flite Test]

Well... it's not officially intended to fly, but it IS an accessory.

My intention was / is to print as many of these little badges as possible in the next week and a bit and bring them to Flitefest to give to the New Pilot experience tent to give them away to anyone who signs up for a lesson.

That said, there's not stopping anyone from printing their own at any size and gluing it onto their flying pig!

Actually, if anyone else wants to print some and bring them that would be awesome! I'm not sure how many I can get printed between then and now. (Files attached)

Here's my entry @Noah - Flite Test

Thanks,
Jason Uberig (aka Uberjay)

LOVE IT!

 

[Jo's squadron]

Good question,
1# What I would say is if you are working on something like "huge eyes" you may announce it that you are making them and that will allow everyone to know what you are working on. This will allow as little duplicate element as possible.
2# We can't stop the community from designing the same accessories /ides but one of the winners will be for best original design. So if you make an awesome farm pig and someone else makes another one you still have a chance to win the $100 gift card.

OK sounds good

 

[Jo's squadron]

So I'm gonna be doing an A-10 Warpig (i.e. a military pig for @ftBilly ). It's gonna have EDFs, turrets, a gatling gun, etc.

 

[bobmac73]

Well... it's not officially intended to fly, but it IS an accessory.

My intention was / is to print as many of these little badges as possible in the next week and a bit and bring them to Flitefest to give to the New Pilot experience tent to give them away to anyone who signs up for a lesson.

That said, there's not stopping anyone from printing their own at any size and gluing it onto their flying pig!

Actually, if anyone else wants to print some and bring them that would be awesome! I'm not sure how many I can get printed between then and now. (Files attached)

Here's my entry @Noah - Flite Test

Thanks,
Jason Uberig (aka Uberjay)

Looks like a great idea. I’ll see what I can come up with. I’ll keep you posted.

 

[Bricks]

Some one should take that curly tail and make Miss Piggy a push pull motor setup.

 

[LitterBug]

Some one should take that curly tail and make Miss Piggy a push pull motor setup.

With Oinkin' BIG motors!

I'm thinkin leds on every facet to light it up like the VEGAS DOME!

 

[Jo's squadron]

@Noah - Flite Test do we post our STL, plans etc in the resource or in this thread or both?

 

[Mr Man]

@Noah - Flite Test do we post our STL, plans etc in the resource or in this thread or both?

Thread 👍

 

[CRASH 22]

Iwas having some trouble setting up my little piggy

I’m pretty sure I have the Aura 5 plugged up correctly

I’ve added a spectrum receiver

 

[CRASH 22]

But I’m not sure where to plug it up on the spectrum receiver ?

 

[CRASH 22]

I also wasn’t sure how to configure the plane on the radio?
I was using Elevon set ip

 

[CRASH 22]

Here’s a video
OneElevon popped up really high on the right side

 

[Mr Man]

Here’s a video
OneElevon popped up really high on the right side

If it still moves correctly (like in the correct directions) then your servo wasn’t centered properly