retiredjake
New member
Just completed my build of the Simple Cub this morning (1st ever build) and took it out this evening for a little testing. Tried taxiing around the tennis court and was unable to control it. If left alone, it will take a hard right turn. With full left rudder, it will slowly turn to the left, then wants to stay to the left. Adjusting trim did not correct the problem. Tried getting the tail off the ground, but it did the same thing. I'm at a loss as to what to look at/for to correct the problem. The only thing I can see out of alignment is the horizontal stabilizer is shifted about 1/8" to the left when looking from the front of the plane.
Any help anyone can provide on how to troubleshoot this will be gratefully accepted.
Any help anyone can provide on how to troubleshoot this will be gratefully accepted.