Hello everybody. I'm new and I am planning on building the ripslinger or racer soon and have some questions.
I recently as in the last 2 months have gotten into RC flying. I have 2 gliders and have had a TON of simulator time with Realflight 6.5. A friend of mine that has been flying for a few years turned me onto this site and the slinger plane, especially since he just built one and it was fun to watch.
Questions are this. I have a spare E-flight Power 10(1100kv) motor with a Castle 54amp ESC and a friend has a E-flight Park 450(890kv) with a 30amp ESC. Both are going to be powered by 3s 2200mah 25-30c Lipos.
Are these ok for the Slinger build ? If so what props ? Also for the Power 10 would it be ok or bad to maybe build the slinger about 15-25% bigger all around ?
Sorry for all the questions but just really interested in this build. I will be doing it from scratch as well if that matters.
Thanks in advance.
I recently as in the last 2 months have gotten into RC flying. I have 2 gliders and have had a TON of simulator time with Realflight 6.5. A friend of mine that has been flying for a few years turned me onto this site and the slinger plane, especially since he just built one and it was fun to watch.
Questions are this. I have a spare E-flight Power 10(1100kv) motor with a Castle 54amp ESC and a friend has a E-flight Park 450(890kv) with a 30amp ESC. Both are going to be powered by 3s 2200mah 25-30c Lipos.
Are these ok for the Slinger build ? If so what props ? Also for the Power 10 would it be ok or bad to maybe build the slinger about 15-25% bigger all around ?
Sorry for all the questions but just really interested in this build. I will be doing it from scratch as well if that matters.
Thanks in advance.