FT Twin Sparrow

Plane FT Twin Sparrow 1.1

fliteadmin

Administrator
Staff member
Admin
Moderator
fliteadmin submitted a new resource:

FT Twin Sparrow Free plans - FT Twin Sparrow Free plans

The FT Twin Sparrow is a new twist on an FT Classic! From chuck glider to Full FPV platform with differential thrust, this little bird will not disappoint. The Sparrow was designed to create an enjoyable and fast build experience while also teaching you all the needed skills to build any of our FliteTest designs. On a 2 cell battery, the FT Twin Sparrow is a fantastic trainer that can teach all the needed to have success in flight. When you install a 3 or 4 cell, you have a fast and...

Read more about this resource...
 

DWiskow

Junior Member
The docs on the Twin Sparrow state CG at 69mm from the leading edge . . . but on the original Sparrow it was 45m . . . why the difference, and which one is right?
 
Last edited:

SP0NZ

FT CAD Gremlin
Staff member
Admin
Moderator
Mentor
FT Twin Sparrow plans have been revised to v1.1. Thanks to FT forum member @radornato for pointing out the needed corrections.
  • Cavities added to spar section of the wing panel
  • Double C-Fold labels added to the spar section of the wing panel
  • Removable nose cut lines added to fuselage
 
FT Twin Sparrow plans have been revised to v1.1. Thanks to FT forum member @radornato for pointing out the needed corrections.
  • Removable nose cut lines added to fuselage


Sorry to dig up an old thread... I am looking at the v1.1 plans, and I don't see the removable nose cut lines on the fuselage.