Perfoamance
Junior Member
Yo people, stoked on these. Started off with FT racer plans, but lots changed by the end....
One is essentialy ripslingeresque, and the other I called an Air Grabber.
Both run on 4s - 650kv with 13x6 and 12x6 props. They absolutely rip ! Super fun to race !
3D printed Motor Mounts, and tail wheel assemblies
One is essentialy ripslingeresque, and the other I called an Air Grabber.
Both run on 4s - 650kv with 13x6 and 12x6 props. They absolutely rip ! Super fun to race !
3D printed Motor Mounts, and tail wheel assemblies