Ok one week left but its possibly doable
First of all I want to wish you a merry cristmas and happy flying in 2018!
Now I have holidays which means tons of time, and there is not much to do, just electronics and details.
The main next step is the hatch, which is probably the most difficult thing on the whole model.
I got the FT F-pack to cristmas and also the FMS EDF, I just did a thrust tes at half throttle and it sounds amasing! Theres nothing to hear from the motor, but the air produces a very loud noise, which sounds cool, but I dont know if superloud air is a good thing.
Alright, here are coming more pics:
I joined the two lower winghalfs, attached ailerons just like the rudder and glued in the nozzle. For those who dont know, the nozzle is flat like a fishtail exhaust in this plane. I also did the trick with peeling paper off, removing foam and glueing paper back on to get the hole bigger.
I made servo holes in the upper surface.
I made spars to straight the wings up and to hold the servos. The ends are heavily beveled because the wingtips are very thin.
I glued them in at differebt areas to leave more room in the tail so that the airflow is better.
Heres a picture of the EDF
It looks very finished, but its not glued yet because I have to fit the EDF in there and make a hatch, so I placed weights on the wings to hold them down.
Overall I think I can make it in time, but I dont know how to create plans. Do you know a good article or forum threat that shows me how to do it?
Have a great cristmas!