FTFC-25 MS Design And Build, Extra 300

[Houndpup Rc]

I doubt it'll be anything like those, they are very easy with gyro though. (They've got like a 17" wingspan I believe)

😲

 

[Mr Man]

Yup, Tiny.

 

[balsa basher]

Even though it still hurts that my OG extra 300 gut crushed to death at FF, version 2 has begun 😂. Thank goodness I made poster board templates!

 

[balsa basher]

Not sure how I multiplied all of those pics, sorry!

 

[Mr Man]

Nice!

 

[Mr Man]

Not sure how I multiplied all of those pics, sorry!

I noticed that, no big deal. 👍

 

[Houndpup Rc]

Not sure how I multiplied all of those pics, sorry!

You can hit "Edit" and take them out.

 

[AIRFORGE]

Not sure how I multiplied all of those pics, sorry!

All good!

 

[balsa basher]

Day 2: seams were not as good as I was hoping for so I covered them with masking tape, I think it will look fine once painted

 

[AIRFORGE]

Day 2: seams were not as good as I was hoping for so I covered them with masking tape, I think it will look fine once painted View attachment 252150

You can try a lightweight foam filler next time. Can find it in your local hobby shops, online hobby stores and Amazon, etc. Apply, let dry, sand, paint.

 

[Mr Man]

You can try a lightweight foam filler next time. Can find it in your local hobby shops, online hobby stores and Amazon, etc. Apply, let dry, sand, paint.

Yup, I think I’ve got a tub of DAP lightweight spackle somewhere…

 

[Houndpup Rc]

I just fill the seams with hot glue or do what John Overstreet does in the MS Corsair build.

 

[Houndpup Rc]

I am really tempted to build this when i get a spare motor!

 

[Mr Man]

It’s awesome!

 

[Houndpup Rc]

It’s awesome!

It looks like it is and I haven't had a 3D plane yet!

 

[Mr Man]

It looks like it is and I haven't had a 3D plane yet!

If you do, you’ll love it, I must point out though, that some trimming is needed in wing installation, trimming that cannot be put into plans

 

[Houndpup Rc]

If you do, you’ll love it, I must point out though, that some trimming is needed in wing installation, trimming that cannot be put into plans

Okay thanks I usually have to do that with all MS planes, even FTs.

 

[Mr Man]

Okay thanks I usually have to do that with all MS planes, even FTs.

Well this is different, you’d have to cut into the formers so the wing can go all the way forward.

 

[Houndpup Rc]

Well this is different, you’d have to cut into the formers so the wing can go all the way forward.

Ah, okay...No big deal!

 

[Mr Man]

Ah, okay...No big deal!

Yup, I didn’t think it was either, just a heads up. 👍