FTFC19: Build-ruary by Paracodespoder.

Paracodespoder

Elite member
Here is my 2019, Build-ruary thread.

(Build skill: 4 Pilot skill: 4)

1: FT sportster
2: FT mini EZ on a 2205 :eek:
3: powered 200% foam board glider trainer
4: FT baby blender

Extra: possibly the @mayan spittt tiny trainer mod. (Not sure yet, might get to distracted ;))
 

Paracodespoder

Elite member
THIS BUILD HAS BEEN COMPLETED AND SUCCESSFULLY MAIDENED.

Sportster:
Build difficulty: ~3
Piloting skills necessary: 3


Plans printed, tiles and cut out, ready to be transferred to foam.
image.jpg

(12 inch ruler for scale)
Moving along nicely, just need some poster board and electronics and it will be ready to go :).
image.jpg

Waiting for a good day to fly!
image.jpg
 
Last edited:

Paracodespoder

Elite member
Build completed and maidened!
Ft mighty mini long-EZ
Build difficulty: 1
Pilot skills necessary: 3


Plans printed, tiled cut out and ready to be transferred to foam.
image.jpg

(12 inch ruler for scale)
UPDATE:
Pieces all cutout and ready to be assembled,
3DCC8067-6971-46C1-A72B-6C2D7C86A0BD.jpeg
AB0C82A2-AE87-4385-8C3F-2E9ADC54D09B.jpeg

And a quick mock-up (no glue),
A0403147-3E4E-4757-A2DE-37FD3A7744B9.jpeg
image.jpg
 

Attachments

  • 53CC52BC-3CBC-4ED5-AA38-987579C9A5F1.jpeg
    53CC52BC-3CBC-4ED5-AA38-987579C9A5F1.jpeg
    533.6 KB · Views: 0
Last edited:

Paracodespoder

Elite member
Build completed and maidened!
Powered glider trainer
Build difficulty: 1
Pilot skills necessary: ~1? (Not sure, experimental build)


Plans printed, tiled cutout and ready to transfer to foamboard
image.jpg

(12 inch ruler for scale)
And yes, this build should only be 3 pieces, right wing, left wing and fuselage. It will be powered off an 1106, 4500kv motor on 2s with 2 9gram servos.
EDIT, 2/11/19: build complete minus electronics,
image.jpg
image.jpg
image.jpg

Flew pretty well on 3s considering the 10mph winds I had to fight :cautious: (penny on wingtip is there to balance out the battery). Hoping for a nice calm day to give it a true flight sometime soon, todays flight was mostly just fighting wind.
 
Last edited:

Paracodespoder

Elite member
Build completed and maidened!
FT Baby Blender
Build difficulty: 3
Pilot skills necessary: 3-4


Plans printed, tiled cut out and ready to be transferred to foam
image.jpg

(12 inch ruler for scale)

UPDATE: completed minus aileron servo and power pod. Not very pretty or well built, but this one probably won’t be around very long.
image.jpg
image.jpg
 
Last edited:

Paracodespoder

Elite member
Sportster is ready to fly! Dual rates and expo set, waiting for a good dry, calm day. Just looked at the forecast, Saturday looks to be my only chance :cautious:, I’ll try to get the mini EZ ready to fly by then because the rest of the week after that looks cold and wet :(. But hey, at least there is going to be one day to fly this week :).
 

DamoRC

Elite member
Mentor
Sportster is ready to fly! Dual rates and expo set, waiting for a good dry, calm day. Just looked at the forecast, Saturday looks to be my only chance :cautious:, I’ll try to get the mini EZ ready to fly by then because the rest of the week after that looks cold and wet :(. But hey, at least there is going to be one day to fly this week :).

Very neat and tidy. Love the color.