FTFC21 - Build-ruary the 4th

[Whit Armstrong]

I can't join because I'm away from home and not able to build anything.

But I sure can design!

 

[mayan]

Hahahahah. @FoamyDM my dear friend. If only I had room in my house at the moment to be building I’d be kicking your ass once again 🤣😂😂🤣😂.

Here are some pics for you to understand what I mean by no room to be building at the moment.

 

[GrizWiz]

Reserved for Contestants:
1) @SquirrelTail is using this Blog for these builds;

Pietenpol-my desgin​

FT Vector-50mm EDF​

FT Viggen-70mm EDF​

@Matagami Designs Mini Nemisis​

2) @The Hangar is using this Blog for these builds;

1) @whackflyer kfm wing​

2) @IdoAllMyOwnStunts speed arrow​

3) @mayan DGA (Mr. Mulligan)​

4) FTFC21 - Aquatic Design & Build: Icon A5​

​

3) @Matthewdupreez is using this Blog for these builds;

1. Ms mustang...
2. ft simple cub...
3. mighty mini spitfire... my own design...
4. mighty mini mustang...

4) @GliderFlyer is using this Blog for these builds;

1. FT delta
2. My own design foamboard Dakota
3. FT baby blender
4. FT commuter

​

5) @mackaiver is using this Blog for these builds;

1. mini p51-B
2. mini scout biplane
3. mini curtis p 36 hawk (maybe if it works with the f-pack?)
4. mini spit

6) @GrizWiz is using this Blog for these builds;

1. EZ Cessna Skymaster (My own design)
2. FT Pun jet or Arrow
3. Mini MS P-40, P-39, or Spitfire(all my own design) I will do a vote on my thread!
4. EZ ME-262 with 2 35mm EDFs
5. Mighty Mini Stick(my own design) Extra

7) @FoamyDM is using this Blog for these builds;

1. Icon A5 -
2. BD-5 - Depron Build
3. FT - Spitfire
4. MS P-38 or FT-Arrow

@FoamyDM Can you change PunJet or Arrow to grifflyer P-51B

 

[mayan]

@FoamyDM Can you change PunJet or Arrow to grifflyer P-51B

Why not do them both ?!

 

[GrizWiz]

Why not do them both ?!

Nah I don't think I'm ready for the pun jet and I'm almost out of foam

 

[FoamyDM]

Hahahahah. @FoamyDM my dear friend. If only I had room in my house at the moment to be building I’d be kicking your ass once again 🤣😂😂🤣😂.

Here are some pics for you to understand what I mean by no room to be building at the moment.
View attachment 190237 View attachment 190238 View attachment 190239

I thought you built mostly at work. So I don't catch your meaning.

I hope that is from a home upgrade, or new place. We miss you here buddy.

You only need a week for the challenge anyway!

 

[FoamyDM]

@FoamyDM Can you change PunJet or Arrow to grifflyer P-51B

Sure.

 

[mayan]

I thought you built mostly at work. So I don't catch your meaning.

I hope that is from a home upgrade, or new place. We miss you here buddy.

You only need a week for the challenge anyway!

I do but covid and such makes me work from home and the house is a mess. My planes are all packed up as best I could. all the electronics are tucked away that only god at this point knows where they are.

 

[FoamyDM]

I may have to build one of these 250g outlaws

Plans are coming. Tomorrow likely

 

[FoamyDM]

I do but covid and such makes me work from home and the house is a mess. My planes are all packed up as best I could. all the electronics are tucked away that only god at this point knows where they are.

Well good luck, and God speed with the house. Next build night, I would love to have you join us, if not to just pick your spirits up.

 

[mayan]

Well good luck, and God speed with the house. Next build night, I would love to have you join us, if not to just pick your spirits up.

Let me know when it’s on I’ll do my best to join

 

[FoamyDM]

Let me know when it’s on I’ll do my best to join

Keep watching here - I will post a Link as I get closer.

My Plan is to Do one in early say Feb 6th. another a few weeks later.

 

[SavageX89]

This looks like tons of fun but sadly I won't be able to joint this go-round. I've got too much else going on, my rc time is very limited.

 

[flyingkelpie]

@FoamyDM, can I 3d print cos then I might be able to join...

 

[FoamyDM]

This looks like tons of fun but sadly I won't be able to joint this go-round. I've got too much else going on, my rc time is very limited.

Here's what I suggest. Pick four planes that are easy to build, that you would like in your fleet. Print the plans out order the servos, then join us for the build nights, or organize one of your own with some rc friends. And see what you can get done and the end of the month you will be set up for spring time.

Come, have fun with us.

 

[Matthewdupreez]

hey @FoamyDM please add a simple scout to my build list

 

[FoamyDM]

@FoamyDM, can I 3d print cos then I might be able to join...

3D print planes? Sure. The print has to begin at the beginning of the month, and the plane be assembled and RTF by the end. Verified with photo evid.

 

[Matthewdupreez]

Well here is my build thread.
yippee
https://forum.flitetest.com/index.p...ot-skill-na-never-flown-a-plane-before.66349/
for all you Piper Comanche fanatics (like me) there may be a surprise for you this buildruary.

 

[FoamyDM]

yippee

I am super excited too!

 

[FoamyDM]

Folks, I just looked at the calendar and noticed Build-ruary begins THIS Monday. I hope you are ready!

I have exciting news for me, I have HRC products scheduled to arrive shortly. So I may scrap my list mostly and switch it for the HRC-RV7, HRC-T-6 Texan, and the HRC Wasp. And I spent last night readying Grifflyer F-22 50mm edf jet.