FlyerInStyle
Elite member
Hello everyone! Please participate in this forums challenge if you want. The goal is to make an all around, twin engine, trainer style STOL plane. that sounds like a lot, but here are the requirements:
OH! and by the way, the deadline for final submissions is march 31st. this might be extended.
Edit!! twin engine is not needed, neither are the plans for floats. look at @The Hangar's submission for a good example. I get that this has turned into more of a challenge for "what should I build next" now it is a what can you come up with! the most unusual designs will be counted the best, but the only requirement if you have a single motor is that it is not in the front of the plane. (This is for newbies, fro not breaking the prop when crashing)
- Must include some type of plans, or measurements and description
- Must be compatible with floats and skis (plans for them must be included in submission)
- Must use something similar to power pack a twin
- Max. wingspan 40 inches
- May use other parts of other planes as plans
- must have a successful flight before submission.
- Have fun!
- optional, but recommended, STOL (like the twin otter)
- The prize is bragging rights and me sending you a really cool surprise 3d printed pen!!
OH! and by the way, the deadline for final submissions is march 31st. this might be extended.
Edit!! twin engine is not needed, neither are the plans for floats. look at @The Hangar's submission for a good example. I get that this has turned into more of a challenge for "what should I build next" now it is a what can you come up with! the most unusual designs will be counted the best, but the only requirement if you have a single motor is that it is not in the front of the plane. (This is for newbies, fro not breaking the prop when crashing)
Last edited: