Gremlin Build - Q about which RX for Turnigy 9x with Orange module

[threecross]

Howdy all,

I'm trying to get a Gremlin in the air. It has the Femto F3 board, and I'm using a Turnigy 9x with the Orange DSM2/X module. I'm looking for a compatible RX. Does Orange make one that will work? If not, does the Spektrum RX sold in the FT store become my best bet?

https://store.flitetest.com/dsmx-quad-race-serial-receiver-with-diversity/

Thanks much, I appreciate the help

 

[ElectriSean]

Both Orange and Lemon make satellite receivers that are half decent.

Orange: https://hobbyking.com/en_us/orangerx-r110xl-dsmx-dsm2-compatible-satellite-receiver.html
Lemon: http://www.greathobbies.com/productinfo/?prod_id=LEM0037

 

[threecross]

Thanks for the help Sean, I have an orangerx R110X that I got working with the CLI bind command.

 

[ElectriSean]

Thanks for the help Sean, I have an orangerx R110X that I got working with the CLI bind command.

Cheers Remember to post some video of the maiden.

 

[threecross]

well, maiden is going to be sometime in the future apparently...

I think I have an arming problem and I cannot control the Gremmie with the TX.

It binds, I can see TX inputs in Betaflight, TX min/mid/max points seem appropriate at 1000/1500/2000 respectively. I can control the motors through the Betaflight tab. I have an arming mode set with an AUX channel, and that appears to be working. But for the life of me I cannot get any control with the TX.

Any suggestions? Thanks much in advance.

Turnigy 9x on stock firmware with OrangeRx module and RX, Oneshot125 if that is of any importance...

 

[ElectriSean]