I have bought the G V2 Power pack for making a gremlin with a TJ Williams frame. After Frying the first ESC on motor start up in the programing phase while connected to betaflight, having it replaced and now having another dead ESC after a slightly hard landing, I'm looking for alternatives. The same issue happened on both escs, where one of the three wires for one of the motors somehow shorted and fried that corner of the board. So, now I've got 2 smoked ESCs and 2 perfectly fine flight controllers. What I want to know is; 1) is there an alternative ESC that is compatible with the 2 FullspeedRC flight cons I have that will work better (I'm hoping there is.)? And, 2) what ESC/flight con setup would work better with the parts I have? The camera setup I have is one of those 3 in 1 fpv things for tiny whoops you get off of amazon for 20$.