Foam Addict
Squirrel member
I finally finished my birthday present!
GWS Corsair NPS.
- Thread starter Foam Addict
- Start date
You're going to love it. I should go ahead and build mine!
Foam Addict
Squirrel member
Oh, I already do ... Fm, I found that I needed to bend in about 5 degrees of washout to make it fly with any sort of stability. On it's pre-paint maiden, It spun and totaled the cowl and lost the battery hatch due to to much Elevator throw. I settled on 3 degrees +/-. The hatch I fabricated, and I taped the cowl together.
I am running a CF 28-22 1300 kv motor on 3 cells with a 10-5, 9-6, or 8-8 APC E prop. I also built a semi scale LG, and braced it with Dowels.
Here's another Pic:
... Fm, I found that I needed to bend in about 5 degrees of washout to make it fly with any sort of stability. On it's pre-paint maiden, It spun and totaled the cowl and lost the battery hatch due to to much Elevator throw. I settled on 3 degrees +/-. The hatch I fabricated, and I taped the cowl together.I am running a CF 28-22 1300 kv motor on 3 cells with a 10-5, 9-6, or 8-8 APC E prop. I also built a semi scale LG, and braced it with Dowels.
Here's another Pic:
Foam Addict
Squirrel member
Between. Wait, sit down please this may be a shocker.
21-25 oz AUW depending on whether I use a 1300 or 2100 3 cell lipo.
My grandpa wanted to give me a nice Birthday present, and it was only $30. I love it, but I have yet to use the LG.
21-25 oz
AUW depending on whether I use a 1300 or 2100 3 cell lipo.My grandpa wanted to give me a nice Birthday present, and it was only $30. I love it, but I have yet to use the LG.
