Help! 2 escs missing

[zakks69]

Hey all! I have an emax th2 with jesc flashed to it that I recently tried (and failed) a 4.2 firmware update. After losing all communication, I tried restoring it to its former version and now the rx along with 2 escs are missing. Ive tried all I can think of but bf only recognizes 2 motors. Please any advice is helpful.

 

[ElectriSean]

Did you backup your configuration before upgrading Betaflight? If not, your manual will direct you to the proper settings files online.

 

[zakks69]

Yes I tried that. Only 2 escs show up in the blhelisuite/jesc config

 

[zakks69]

Just checked with a multimeter and got cont through all the right pathways

 

[zakks69]

Downgraded firmware after using irc fixer but it only works with the emax custom 4.1 firmware to use with the e6 transmitter... I just got a radiolite 2 and cant get the drone to respond on 4.2 firmware even after upgrading to btfl config 10.7...

 

[ElectriSean]

I'm not familiar with that radio, do you have a link?

 

[zakks69]

Its from betafpv. Great little budget replacement. But why would the drone lose signal to 2 escs and rx with any firmware besides 4.1.1?

 

[ElectriSean]

Something in the settings... Perhaps there is some resource remapping going on. Post the diff file from the version that works and we'll take a look.