Hello. I have a Flywoo Firefly 1S Nano Baby V2 drone. While setting up the device in Betaflight, the connection suddenly dropped, and I can't reconnect. When I plug in the USB cable, it says the USB device is faulty and cannot be recognized. Can you help me resolve this issue? Flight control: f405s_aio
HELP! FlywooF405s fc usb device not recognized.
- Thread starter tylcnky
- Start date
I'm no expert but I've had good results using ImpulseRC Driver Fixer to fix problems like yours.
impulserc.com
Here is a video with more info
Downloads
Essential utilities, firmware and models for use with ImpulseRC products. ImpulseOSD software, ImpulseRC Driver Fixer, Video transmitter firmware (AU and International Versions) and other useful links and utilities.
impulserc.com
Here is a video with more info
According to my research, the F405oe6 chip next to the diode I marked as faulty in the additional photo is a chip related to the STM32. If I'm not mistaken, it's a driver board required for the STM32 USB connection. So, since I can't establish a USB connection, the possibility of the diode I marked being faulty increases. In the second video I sent you the YouTube link to, when I measure it with a digital multimeter, I hear a beep indicating a short circuit. How can I replace this diode? What diode value should I use? Could you provide some information on this?
https://ibb.co/ymWshpKR
https://ibb.co/ymWshpKR
I have no idea. But I highly doubt this is your issue.
I have had similar difficulties, the FC quits being recognized by windows.
For me, the Impulse Driver OR a different USB cable has always fixed the problem.
If you are not getting the USB sound when you plug it in, your problem is a driver or a cable.
Unless you are an electronics expert, poking around the FC is a good way to fry it. With some tests, multimeters apply a voltage. If the voltage is to high or wrong polarity, it can damage what you are testing.
Last edited: