Spooky II
Junior Member
I have the turnigy 9x with kk 2.1.5 board and the rudder control on my spiderquad is swiched with the aileron control
so the rudder does what the ailerons job and aileron does the rudders
could the problem be that I wired my recever to the board wrong by only pluging in the signal wire only because I did not have enough servo wires or can I switch it in the turnigy 9x controler settings
so the rudder does what the ailerons job and aileron does the rudders
could the problem be that I wired my recever to the board wrong by only pluging in the signal wire only because I did not have enough servo wires or can I switch it in the turnigy 9x controler settings