theugleeflyer
New member
Hey all!
Transmitter: DX6e
Receiver: Spektrum AR610 6CH sport receiver Dsmx
flightchip: Naze 32
ESC: Arris 20A, 2-4s LiPo
PROBLEM:
The controls do not show on clean flight. (No Stick movement)
The controls do not work when I am connected to cleanflight and when I am disconnected.
Cannot set cycle time to 1500 as shown in Flitetest video:
https://www.youtube.com/watch?v=aFf3ybXDuYs&t=831s (@7:00)
CMD [(set looptime = 1500)]
Battery is connected: YES
Chip beeps when battery is connected: YES
Transmitter has battery: YES
Receiver and Transmitter are bound: YES
Connected to Cleanflight: YES, v1.14.1
Cleanflight Accelerometer works: YES
All pins are connected: YES
Receiver Settings on cleanflight set to JR/Spektrum/Graupner: YES
Configuration >> Mixer >> Set to Quad X: YES
Max throttle: 2000
Min throttle: 1000
Transmitter: DX6e
Receiver: Spektrum AR610 6CH sport receiver Dsmx
flightchip: Naze 32
ESC: Arris 20A, 2-4s LiPo
PROBLEM:
The controls do not show on clean flight. (No Stick movement)
The controls do not work when I am connected to cleanflight and when I am disconnected.
Cannot set cycle time to 1500 as shown in Flitetest video:
https://www.youtube.com/watch?v=aFf3ybXDuYs&t=831s (@7:00)
CMD [(set looptime = 1500)]
Battery is connected: YES
Chip beeps when battery is connected: YES
Transmitter has battery: YES
Receiver and Transmitter are bound: YES
Connected to Cleanflight: YES, v1.14.1
Cleanflight Accelerometer works: YES
All pins are connected: YES
Receiver Settings on cleanflight set to JR/Spektrum/Graupner: YES
Configuration >> Mixer >> Set to Quad X: YES
Max throttle: 2000
Min throttle: 1000