hi there from the Uk, building a tiny trainer soon!!

[DeltaZulu]

hi there forum!

my daughter and i are going to attempt to build a Plane!!! yeah!!!

i'm sure i will have a few moments where we'll need some help.

cant wait!

DD

 

[DeltaZulu]

to make the Tiny trainer and RC plane, i'll need to get the Power Pack A,

here in the uk Graupner sell this, but it's different to the Flight Test version...?? it comes with a 5x3 prop not the recomended 6x3 minimum, will this be a problem?

The set contains

• 1x Flite Test LiPo storage bag
• 4x Linkage connections
• 1x 300 mm Y cable
• 2x 200 mm extension cable
• 1x 2 mm hex-key
• 1x Phillips screwdriver
• 1x Motor ULTRA 2804 2300KV brushless Motor CCW
• 1x ULTRA 20 A SBEC BL HELI S 2-4S XT-30 speed controller
• 4x 5g servo
• 2x Propellers C-Prop 5 x 3 inch CCW

DD

 

[JamesonOKC]

Hi Delta! It is so awesome that you and your daughter are going to build a plane! I had lots of trouble with other planes before I built the Tiny Trainer. This is a great plane to get started with. The 5x3 prop should be just fine for you. The plane will be a little slower but for the Tiny Trainer, that is no problem. Good lucky and enjoy the memories you will be making!

 

[BS projects inc.]

I have a tiny trainer and the 5x3 prop will be plenty of power to fly. Make sure you give the plane a paint scheme that makes it easy to see in the air or use blue painter tape on the wingtips to make sure you know what the correct orientation is during your first flight. Good luck

 

[DeltaZulu]

thanks guys!

studying radio gear at mo, my head is spinning slighly.... lol

graupners powerpack comes with xt30 on the esc, and recomend a 3s lipo with that.. maybe thats why the 5x3 prop..?