Hi!

Stevo430687

Member
Here are some pics!
BloodyHybrid2a.jpeg
BloodyHybrid2b.jpeg
BloodyHybrid2c.jpeg
 

Stevo430687

Member
Also, thought I'd add that it's power plant is the E-max 935 kV motor from the "B" pack and a 9x5 prop. 13:30 with 2200 mAh 3S. I haven't used a 4S yet, but it's in the plan...
 

Mad_Mechanic

Well-known member
When you go 4S, I'm thinking you will need to change props. I'm trying to recall the rule of thumb from Flite Test, but I think you will have to go down in size (diameter) of prop?

The limiting factors there are max amps on motor and max amps on ESC.
 

Stevo430687

Member
When you go 4S, I'm thinking you will need to change props. I'm trying to recall the rule of thumb from Flite Test, but I think you will have to go down in size (diameter) of prop?

The limiting factors there are max amps on motor and max amps on ESC.
A while back I used an ampmeter to check this out, if I remember correctly, it was pulling about 17 amps with a 4S, should be safe as I'm using a 30A esc. However, i will check again before I try it. Thank you for the thought. Peace-