saundw
Senior Member
I am 100% new to multi-rotors. I just bought a Integrated PCB Micro Quad. I have done all of the motor and ESC work and made sure that all of the ESC's were programmed in the appropriate manner and also that the blades were spinning in the right way. I have all of my ESC's connected to the KK board as well as my RX plugged into the board with 4 male-to-male servo plugs. Here is where I have trouble, I don't know which way 0 is on my Gain Adjustments. I put the yaw pot all the way counter-clockwise and than the RX will bind but the motors won't work. When I spin up the quad on the ground, it just flips over. And one more thing, I do not appear to have any control input other than throttle. I could be wrong but I don't think so. I do know that I have everything plugged in right (I think).
PLEASE HELP!
Thanks in advance,
Will
Quad Noobie
PLEASE HELP!
Thanks in advance,
Will
Quad Noobie