Some more work on the Mini Sky Walker on the weekend. Its going slower than expected but coming along very neat so far.
Some people on the RC Groups forum had the servo poking through the Vertical Stabilizer. I have no idea why they did this as it would be creating some degree of drag. I couldn't see any reason why you would mount it that way so I opted for mounting it the way it was intended!! How innovative hey
As you can see it sits nice and flush. Its worth noting that I have no intention of adding a rudder servo . . because I'm only ever going to be flying straight
Mounting the motor went fine, just need to find two more small screws . . maybe the 2 screws will hold ??
This is the FatShark Camera that came with the Predators. It mounted up fine without needing to cut the canopy. Its actually mounted to the canopy not the fuselage.
Wing Servos went in fine as did the Horns all of which have been epoxied in place. Servos held down with Hot Glue at this stage. The other thing that slowed the construction down is I need to solder extensions to all the servos.
Finally this is the way she look at the moment.
Still need to add the model name which will happen soon.
Next step is mounting the video TX then paint