... Or am I doing it wrong (probably the later). I am trying to get the FT Aura to work with my AR620 in recent scratch build because it is my only receiver. The overview on the store page claims the FT Aura: "Connects easily to receivers or satellites from all major radio brands", although the diagram in the quick guide manual only lists DSMX as connecting through the receiver extension B port not the servo wire B port. FT Aura 5 does not recognize a receiver signal when binding my DX6e transmitter and AR620 receiver with the servo wire connected to the 1/DATA port on the receiver and the servo wire B port. At this point I am tempted to simply give up and purchase a SRXL2 Serial Micro receiver, then again it's often wiser to first ask for a second opinion than to throw parts at the problem.