Just some planes i made

[Fpv on cloud]

These r some ft planes i made! Hope ft likes it!
Btw for the ft mini mustang i used the master series technique wing,it was very ez just mark the spars and use the cool techniques.
The plans for these were scaled right on a tv and hand drawn pretty darn time consuming and hard but i m dedicated 👍🏽

 

[Fpv on cloud]

Wow yall i just joined and 2 likes already...thanks.

 

[BlockerAviation]

Cool Airplanes! I haven't built the edge yet, how well does it go together?

 

[The Fopster]

That Mustang looks particularly tidy. Excellent!

 

[Fpv on cloud]

Cool Airplanes! I haven't built the edge yet, how well does it go together?

I m 14 and very dedicated i bet you can scratch build it it was not the most difficult but it was the most complex out of all my builds. If u ask me the speed build kit would go pretty ez but scratch builds is what i love (maybe because I can't get the speed build😂) so pretty ez for me just takes time btw if u r scratch building without landing gear it fits into 4sheets and mini mustand was compromised into 1 sheet and many more ( sorry for the long message🙁)

 

[Fpv on cloud]

That Mustang looks particularly tidy. Excellent!

White strips are normal white paper gray and a little red spray paint and the black stripes are just some half dollar walmart apple barrel black paint still needs some decal typa things to match the exact scheme ft did on the review vid

 

[BlockerAviation]

I m 14 and very dedicated i bet you can scratch build it it was not the most difficult but it was the most complex out of all my builds. If u ask me the speed build kit would go pretty ez but scratch builds is what i love (maybe because I can't get the speed build😂) so pretty ez for me just takes time btw if u r scratch building without landing gear it fits into 4sheets and mini mustand was compromised into 1 sheet and many more ( sorry for the long message🙁)

Nice, when did you start flying? I've been flying for 12yrs now (I'm about to be 16). Ill probably scratch build the edge after I get my Pilatus Pc6 done for the bush plane challenge II. I've been looking for a larger 3d airplane that has more presents in the air than my flat-outs.

 

[The Hangar]

Nice, when did you start flying? I've been flying for 12yrs now (I'm about to be 16). Ill probably scratch build the edge after I get my Pilatus Pc6 done for the bush plane challenge II. I've been looking for a larger 3d airplane that has more presents in the air than my flat-outs.

Have you thought about making an upscaled edge as well? I'm considering upscaling the plans a bit and using a monster motor on 6s.

 

[BlockerAviation]

Have you thought about making an upscaled edge as well? I'm considering upscaling the plans a bit and using a monster motor on 6s.

I've thought about it but, I only have a c pack motor to spare. All of my bigger ones are in my balsa airplanes like my Stinson voyager.

 

[Fpv on cloud]

Nice, when did you start flying? I've been flying for 12yrs now (I'm about to be 16). Ill probably scratch build the edge after I get my Pilatus Pc6 done for the bush plane challenge II. I've been looking for a larger 3d airplane that has more presents in the air than my flat-outs.

Just started in 2020 got a flysky fsi6 for 20 bucks

 

[The Hangar]

I've thought about it but, I only have a c pack motor to spare. All of my bigger ones are in my balsa airplanes like my Stinson voyager.

The emax 4020's are surprisingly cheap, and that's the motor I'll be using. 140% would give me a 55" WS which should be about right for that motor size. Or, maybe I should make a yak or mxs instead... Hard choices...

 

[Fpv on cloud]

I've thought about it but, I only have a c pack motor to spare. All of my bigger ones are in my balsa airplanes like my Stinson voyager.

U don't necessarily need a monster ft motor there r heckka alotta different motors out there

 

[Fpv on cloud]

I've thought about it but, I only have a c pack motor to spare. All of my bigger ones are in my balsa airplanes like my Stinson voyager.

Have you thought about making an upscaled edge as well? I'm considering upscaling the plans a bit and using a monster motor on 6s.

Ok but how much approx will it weigh?

 

[The Hangar]

Ok but how much approx will it weigh?

My guess is that it will weigh 5-6 pounds

 

[BlockerAviation]

My guess is that it will weigh 5-6 pounds

I wonder if a rimfire 1.20 would be enough? I have one of those!

 

[Fpv on cloud]

My guess is that it will weigh 5-6 pounds

:/ i m outta here the max thrust my biggest motor ever reached is 1.4 kg 😂 Oh wait... i m guessing 3 pounds

 

[BlockerAviation]

U don't necessarily need a monster ft motor there r heckka alotta different motors out there

I have a very wide selection of motors in my shop, just nothing bigger than a c pack, other than my rimfire 1.20 witch I don't even have batteries for.

 

[BlockerAviation]

I have a very wide selection of motors in my shop, just nothing bigger than a c pack, other than my rimfire 1.20 witch I don't even have batteries for.

I'm also just looking to throw something together and am not trying to build anything special. So Ill probably build mine by the book

 

[The Hangar]

I wonder if a rimfire 1.20 would be enough? I have one of those!

Hmm, I don’t know if that would be quite enough...

 

[Fpv on cloud]

Hmm, I don’t know if that would be quite enough...

Agreed even tho i m new just dosent look beefy enough