Keeping it neat and spaced

[lobstermash]

My Bixler always looked like it had cavernous space in the canopy. Then I put in a 40A ESC with a 4A UBEC. Still cavernous. Then I added the wiring for the vtx, camera and pan/tilt servos. Still plenty of space. Then I added an FMA Copilot. Not cavernous, but roomy. Then I added a G-OSD, which only has a board and a GPS module. Now the canopy needs some serious reorganising to both get the battery in there and keep everything spaced neatly and properly accessible.

I need some inspiration. When/if my FrSky combo arrives I'll be pulling out the velcro and tape and that'll be the way she stays. How do you pack your FPV plane? Pics please.

 

[Nonamerc]

Dont have pictures but I make my fpv wires just the lenght that I need. Also I put a big amount of distance between the vtx and my EZuhf rx.

 

[colorex]

I once thought of making a larger canopy by cutting straight out towards the nose, opening acess to the whole nose. Might affect it structurally though. Otherwise it would allow for a lot of ease in mounting and accessing.

 

[lobstermash]

Currently I've only got the pan/tilt camera, vtx and the FMA button on the ply canopy, which is held on using velcro straps. I'll have a think about a better canopy retention mechanism, and stick a few more things on there instead of inside the plane.