Kinetic 800 motor issues! Please Help!

[jnrocks1]

My kinetics motor won't run it just beeps I don't think its the esc because the servos work. please help

 

[jetpackninja]

You haven't given us a lot of info to go on.
Have you tried setting the endpoints?
To do this:
REMOVE YOUR PROP (for safety)
Turn on your radio, throttle trim all the way down (leave it there), move the throttle stick to full throttle, plug the battery into the ESC. The motor should NOT spin, the ESC will beep beep (high endpoint learned), move the throttle stick to off, (the low endpoint is now learned). The ESC should now arm normally and be ready to use.

 

[jnrocks1]

thanks I am running a 800mah 2s battery and a ar6115e dsmx receiver the rest of it is stock.

 

[jnrocks1]

it works now but it spins backwards I reversed it on my radio but it still runs backwards

 

[nibnobsam]

Turn it off and swap 2 of the motor wires round to reverse the motor.

 

[jnrocks1]

thank you!

 

[jetpackninja]

Awesome!

 

[KKArioKA]

if all problems were that easy .... happy flying jnrocks1 !!!