Let me start by saying I'm really ignorant about what I'm trying to do here. I've flown toy drones and my XK380 (which is still kind of a toy drone), and I wanted to go a step deeper so I bought a KingKong 100 and a Jumper T8SG transmitter to fly it with. Probably a mistake. I'm trying to get this thing going. I've learned a lot through videos reading posts, but I'm at a loss. I can't get my motors to respond to the controller. I flashed the drone to ver. 2.0.5 thru Cleanflight. In CleanFlight/configuration I changed the motor type to brushed. Via CleanFlight/motors I can spin the motors up so I'm thinking that part is OK. From Cleanflight/setup I calibrated the accelerometer. I can even see the meters in CleanFlight change when I move stick position on the T8SG so I guessing the transmitter and receiver are "talking". I saw a post that said something about setting the upper and lower throttle limits to 2000 and 1000 accordingly or else CleanFlight won't arm, or something like that. I think I made that change on the transmitter correctly but still no go. I'm thinking that getting the drone to Arm is where my problem lies. I would LOVE to have a private chat or email or whatever you guys call it with someone who wouldn't mind answering some dumb drone questions from an old guy. That way I'm not boring all the experts with my ignorance. I'm sure can get going with this if I can get just a little help to get me going. Thanks