Kraken - BUILD
- Thread starter fliteadmin
- Start date
Andrew
G'day Mate
Shaun.hale
New member
Brilliant 👏
The day is here! We finally have the plans available for the Kraken.
FREE PLANS
SUPPLEMENTAL VIDEOS
This kit is so big that it wouldn't even fit in one screenshot. The Speed Build Kit will be available sometime early August.
Also, keep your eyes open for tons of cool accessories incoming!
Measurements for landing gear wire
18" long x 1/8" thick (45cm long x 3.18mm thick)
Bends are 2" (5cm) and 6" (16cm)
Links for tires incoming!
A big ol' wing needs a big ol' battery!
We've been using this 6000MAh made by Gens ace. This can get you close to a half-hour of flight time and is impressively light for its size.
RECOMMENDED ELECTRONICS
- Motor: 2x Suppo 2217/7 1250kv Brushless Outrunner
- ESC: 2x Suppo 30A Brushless ESC
- Servo: 2x GS-9025MG Micro Analog 11g Metal-Gear
- Prop: 2x APC 10x4.7 Slow-Fly
- Battery: 2200 - 6000 mAH 3s
- 4x 12" Servo Extensions
FREE PLANS
Hope you all have as much fun with this plane as we do! Go crazy! See what kind of trouble you can get this monster into. Post some photos or videos below!
Shaun.hale
New member
I am going to have a go see can do it if i do it I let you and put pick ok just got to try it
