Hai-Lee
Old and Bold RC PILOT
As per the name of the thread if you build fly and crash a KFM wing then please post your story, pics, or videos. This will help with making the wing even tougher over time!
If you actually need to , build, fly or repair your wing this is the thread that hopefully brings it all together for you! Whilst the thread was suggested as a vehicle for the wing found here:- https://forum.flitetest.com/index.php?threads/collaborators-build-1-800-mm-kfm-flying-wing.54085/ , it is equally applicable and open to all other KFM wing types and builds.
Here is a post of the latest wing reinforcing recommendations for those that fly full throttle into obstacles including the ground!
View of the inlaid CF spar and the 2 Bamboo BBQ skewer sub spars fitted to reduce impact damage or rather to distribute the damage rather than allowing the obstacle to pass through the wing severing it into 2 pieces!
I look forward to your adventures, builds, flights and repairs!
Have fun!
If you actually need to , build, fly or repair your wing this is the thread that hopefully brings it all together for you! Whilst the thread was suggested as a vehicle for the wing found here:- https://forum.flitetest.com/index.php?threads/collaborators-build-1-800-mm-kfm-flying-wing.54085/ , it is equally applicable and open to all other KFM wing types and builds.
Here is a post of the latest wing reinforcing recommendations for those that fly full throttle into obstacles including the ground!
View of the inlaid CF spar and the 2 Bamboo BBQ skewer sub spars fitted to reduce impact damage or rather to distribute the damage rather than allowing the obstacle to pass through the wing severing it into 2 pieces!
I look forward to your adventures, builds, flights and repairs!
Have fun!