Libelle DLG Taranis Programming Help

[884camo884]

Hi Flite Test Community,

I have a Dream Flight Libelle DLG Glider. It is fitted with the official Libelle 4.7g servos and a D4R-II receiver. I have a FrSky Taranis and am wondering if anyone can help me set it up properly as I have been trying to program it over the last week with no luck.

Channel 1 = Left Aileron
Channel 2 = Right Aileron
Channel 3 = Elevator
Channel 4 = Rudder

This is what I need to program:

Flaperons on Throttle (they go up past level, they shouldn't do this right?)
Launch Mode (0-1mm up - Reflex)
Cruise Mode (0mm (centered) - Neutral)
Thermal Mode (2-3mm down - Camber)
Land (15mm Down - Brake)

Thanks everyone, I am really struggling with all the programming.

Regards, Cameron

 

[pressalltheknobs]

I'd love to have a go at this but I'm a bit busy and probably others that already know what they are doing have have addressed the problem.

Try this...
http://rc-soar.com/opentx/setups/esoar/index.htm

You may need to update it if you have a Taranis plus. I haven't looked into it very far yet.

 

[pressalltheknobs]

here's another specific to the Libelle

http://rcsettings.com/index.php/viewdownload/11-sailplanes/78-libelle-dlg

 

[ZoomNBoom]

I can talk you through it, but perhaps you can post the eepe you already have as a starting point?