Help! Making a winglet for the Goblin!!?

[otto54]

Hello, I need your help to design a winglet for the Goblin model aircraft.
Could you give me the measurements of the outer wing profile to design the wingtip in fusion 360, if you can attach some photos I would appreciate it a lot
I will notify you when I have the file ready so you can modify it.
This would serve to improve the rounded wing tip by cutting that piece.
Thanks for the help.

 

[JasonK]

Hello, I need your help to design a winglet for the Goblin model aircraft.
Could you give me the measurements of the outer wing profile to design the wingtip in fusion 360, if you can attach some photos I would appreciate it a lot
I will notify you when I have the file ready so you can modify it.
This would serve to improve the rounded wing tip by cutting that piece.
Thanks for the help.

you can use the plans here (and possibly need to cut out the wing tip) and measure it yourself.
If your goal is to make wingtips, you might actually want to look at the build video, as you would probably need to fully modify the wing to add tips - there is over 1 in of under-camber at the tips.