Burnhard
Well-known member
And another one on the landing gear if the 50“ C47. How long should the wire be from the bend from the wood down to the bend for the wheel? Landing gear set arrived today so I can start work on the wing.
Master Series Builds, Past Present and Future.
- Thread starter Splinter189
- Start date
CappyAmeric
Elite member
I think he talks about all 3 versions of the landing gear length at the end of the C-47 special features video.
Burnhard
Well-known member
Just watched it and indeed, exactly what I was looking for. Many thanks for the hint! Have you memorized all of these ?
Crash Test RC
Active member
Any updates on the PBY Catalina?
Splinter189
Master member
No update on the Catalina. Been sidetracked with manufacturing. Been a busy week. We bagan work on the all new SkyFX P40 and started work on a Shinden.
Attachments
Last edited:
Crash Test RC
Active member
They look great!
Aslansmonkey
Well-known member
Splinter189
Master member
Crash Test RC
Active member
Will the F-18 be a value bundle?
Splinter189
Master member
Not likely
PsyBorg
Wake up! Time to fly!
shouldnt be long
bit of work on the F18 today View attachment 213803 View attachment 213804 View attachment 213805
That looks like something going after the land speed record on the salt flats in the current condition. That or a hydro plane racing boats with a sort of tunnel hull.
Bo123
Elite member
I like the 2 seater canopy. I've always found 2 seater fighter's look much better than the single seater's.shouldnt be long
bit of work on the F18 today View attachment 213803 View attachment 213804 View attachment 213805
Battery800
Elite member
Shinden? Or xp-55? Also just received the p-40. Which spinner was on it in the picture?shouldnt be long
bit of work on the F18 today View attachment 213803 View attachment 213804 View attachment 213805
Splinter189
Master member
Its the small spinner made by FT
Battery800
Elite member
Ok yeah that is what I got
Battery800
Elite member
Also what spray paint did you use for the olive green
Intashu
Elite member
shouldnt be long
bit of work on the F18 today
So much Hype if true on the P-40.
Also, Holy crap that jet is HUGE! You really enjoy seeing just how far you can push foamboard! I'd have to imagine after a certain amount of size and power, you'd start running into issues with foam-board simply not being strong enough to handle the stress loads, Do you have a method of maddness to calculate the loads the foamboard can take to determine when and where to reinforce and with how much, or just run on pure skill, practice, and experience when building out models at this size!?
Splinter189
Master member
I am running my the first printed SkyFX P40s today, hopefully i can get sampls quickly knock3d out
No worries in the F18, even though its big but its ultra light. It will require a wooden spar, nothing really fancy
Splinter189
Master member
There are a few changes to be made, rivets to be added etx. Getting close!
Last edited:
Similar threads
