rightcoastbias
Junior Member
Hello,
My skill level is experience with a Zagi 400x Delta. Thus, I am comfortable with "bank and yank" and orienting myself.
I have decided to build some swappables. Out of sheer excitment I have built:
-two power pods
-an Old Fogey
-a FT Delta
I currently have the following components in a power pod:
-Suppo 2208-12 1800KV
-GWS EP-6050 [6" diameter x 5" pitch]
-20A Hobbyking RedBrick ESC
-3S 1500mAh Generic LiPo
-Turnigy 8 channel Rx [receiving from my Turnigy 9x]
Before I try to put a bad combo into the ground:
What swappable would cater to my powerpod combo? [ I have no problem building another model. ]
Is the 3S 1500mAh too large for most swappables? Will I have horrible high stall speeds?
Thanks a ton.
PS: I have a batch of nano-tecs on order [a 3S 500mAh, two 3S 850mAh and a 3S 1000mAh.]
My skill level is experience with a Zagi 400x Delta. Thus, I am comfortable with "bank and yank" and orienting myself.
I have decided to build some swappables. Out of sheer excitment I have built:
-two power pods
-an Old Fogey
-a FT Delta
I currently have the following components in a power pod:
-Suppo 2208-12 1800KV
-GWS EP-6050 [6" diameter x 5" pitch]
-20A Hobbyking RedBrick ESC
-3S 1500mAh Generic LiPo
-Turnigy 8 channel Rx [receiving from my Turnigy 9x]
Before I try to put a bad combo into the ground:
What swappable would cater to my powerpod combo? [ I have no problem building another model. ]
Is the 3S 1500mAh too large for most swappables? Will I have horrible high stall speeds?
Thanks a ton.
PS: I have a batch of nano-tecs on order [a 3S 500mAh, two 3S 850mAh and a 3S 1000mAh.]