Micro Servos

[AviationDude705]

I have an E-Flite Micro 3D Yak and the E-Flite Sport Cub and the Micro servos I have no idea how they work or how I can get wire small enough to fit into them without getting some sort of extension to fit into the control horn. Does anyone have any recommendations for an easy micro setup. Also the battery range I'm looking for is a 1s 200mah LiPo and a 2s 800mah LiPo. ESCs and Motors would also be great too because I have little experience of using a Micro setup but I have some planes that the setup would be amazing for.

 

[The Hangar]

I have an E-Flite Micro 3D Yak and the E-Flite Sport Cub and the Micro servos I have no idea how they work or how I can get wire small enough to fit into them without getting some sort of extension to fit into the control horn. Does anyone have any recommendations for an easy micro setup. Also the battery range I'm looking for is a 1s 200mah LiPo and a 2s 800mah LiPo. ESCs and Motors would also be great too because I have little experience of using a Micro setup but I have some planes that the setup would be amazing for.

You can get UMX pushrods on the horizon hobby site:
https://www.horizonhobby.com/product/pushrod-set-umx-a-10-bl/EFLU3708.html
I bought some really thin piano wire at my local hobby shop that I use for pushrods in my custom micro builds.

You can get a 200mah 1s lipo here:
https://www.horizonhobby.com/product/200mah-1s-3.7v-45c-lipo-battery-ultra-micro/EFLB2001S45.html

For a micro 2s setup I wouldn’t use a 800 mah lipo, something between 200 and 300 mah would be perfect. I’ve used these in lots of my 2s UMX’s with great success:
https://www.horizonhobby.com/product/7.4v-280mah-2s-30c-lipo-battery-ph/ONXP2802S30PH.html

 

[AviationDude705]

You can get UMX pushrods on the horizon hobby site:
https://www.horizonhobby.com/product/pushrod-set-umx-a-10-bl/EFLU3708.html
I bought some really thin piano wire at my local hobby shop that I use for pushrods in my custom micro builds.

You can get a 200mah 1s lipo here:
https://www.horizonhobby.com/product/200mah-1s-3.7v-45c-lipo-battery-ultra-micro/EFLB2001S45.html

For a micro 2s setup I wouldn’t use a 800 mah lipo, something between 200 and 300 mah would be perfect. I’ve used these in lots of my 2s UMX’s with great success:
https://www.horizonhobby.com/product/7.4v-280mah-2s-30c-lipo-battery-ph/ONXP2802S30PH.html

What would you recommend for a receiver and electronics too?

 

[The Hangar]

What would you recommend for a receiver and electronics too?

Your best bet is to use the micro gear from umx planes, often you can get them for fairly cheap on eBay or rc groups. You can also get them from backcountry rc:
https://www.backcountryrc.com/product-page/5ch-micro-servo-esc-brick
They are an all-in-one brick so you don’t need a separate receiver or esc. All you need is a motor and battery.