micro stang

[dutchmonkey]

so i felt like shrinking my 3dlabprint mustang down to a 24" span. so after a few test prints here is 3/4 of the fuse done and thats the 1806 that i am putting in it for reference

 

[rockyboy]

That looks very neat! Fingers crossed for good flight characteristics!

 

[dutchmonkey]

so left wing printed came in at 29.1gr the fuse section i have printed came in at 30gr

 

[Chuppster]

Looking forward to seeing how this turns out! I have a full sized one on the repair right now.

 

[dutchmonkey]

Got her put together with out battery clip and motor mount she is 108gr going to put some red bull racing logos

 

[JGplanes]

I'm curious how the walls printed scaled down. I assume it would only print one outer shell wall still? On my spitfire print I tried to scale the walls become so thin only simplify3D would print the outer layer and barely attach the interior webbing.

 

[T-Richard]

Very fun project. Looking forward to updates!

 

[dutchmonkey]

I'm curious how the walls printed scaled down. I assume it would only print one outer shell wall still? On my spitfire print I tried to scale the walls become so thin only simplify3D would print the outer layer and barely attach the interior webbing.

So it took some tinkering but I printed this with .24mm wall thickness and they are attached to the outer walls just like the full size model. You need to scale everything the same as a base point and adjust from there

 

[bhursey]

Hows it going im wondering how she flys..

 

[dutchmonkey]

i got distracted with the mini dusty and haven't finished this. i need to get a battery and servos for this one hopefully in the next couple of weeks she will fly

 

[IcedStorm777]

Any plans?

 

[IcedStorm777]

And how did it fly