Mighty Mini F-82 2.0

[Fleischmütze]

These gaps are intentional. The bottom for the part on the left and the right of the part on the right are to break away. This is just built in support material. Please share your build. And feel free to ask any other questions.

Oh, yes that makes sense. And there I was, wondering how to fit the "beams" of the scoops into the fuselage. mD
Thank you very much.
I will definitely post some pictures of my build, when I'm done. And again, thank you for that awesome model.

 

[KalleFly]

yesterdays flights with F-82

 

[Matagami Designs]

yesterdays flights with F-82

This is awesome! I love the chase drone footage.

 

[Matagami Designs]

Here we go again. 😁

 

[Matagami Designs]

Made some good progress today.

 

[Matagami Designs]

Finally found the motivation to build again. Got this mustang pretty much finished. Just need to minwax and paint. The only differences are the nose has updated exhaust geometry to be more scale and I planed out the elevator servo in the rear of the fuselage this time around.

 

[Matagami Designs]

This took FOREVER! Probably ran into every problem with painting as far as overspray, runs, bleeds, cracking, peeling etc... BUT its finally Done! Pretty happy with how its turned out just wish some of these decals had better adhesion.

Yup it's an F-82 Thunderbird! 😂🤣😬

Hopefully I can get a few good flights out of it before I wreck it. 😅

 

[The Hangar]

This took FOREVER! Probably ran into every problem with painting as far as overspray, runs, bleeds, cracking, peeling etc... BUT its finally Done! Pretty happy with how its turned out just wish some of these decals had better adhesion. View attachment 200070 View attachment 200071 View attachment 200072

Yup it's an F-82 Thunderbird! 😂🤣😬

Hopefully I can get a few good flights out of it before I wreck it. 😅

I love it!! The thunderbirds scheme looks amazing on it! 😂👍👍

 

[Monte.C]

This took FOREVER! Probably ran into every problem with painting as far as overspray, runs, bleeds, cracking, peeling etc... BUT its finally Done! Pretty happy with how its turned out just wish some of these decals had better adhesion. View attachment 200070 View attachment 200071 View attachment 200072

Yup it's an F-82 Thunderbird! 😂🤣😬

Hopefully I can get a few good flights out of it before I wreck it. 😅

That's a piece of work!

 

[Jade_Monkey07]

Yes but your mounting pattern will be off for the motor since this featue is integral. I suspect you could fill the holes and print it that way and then drill them out later. I also did a cowl for the P38 master series if your interested in adapting one to your own design. What is nice about these for the mustang is they are square which lends itself to an easy build with the foam.

Id love to print the cowlings for my mini master p38. Are the stl files available anywhere for this? Did you ever end up doing any of the other parts?