Mikoyan-Gurevich I-250 (Mig - 13) Prop & EDF multipower

[leaded50]

Looks like it works well
What mechanism did you use for the hatch.
The rudder wheel seems to turn great!
Were you having problems with the edf?

Hatch have a lock system by a piece of ss rod, moving rearward to lock, forward to open , who get into "loop" down from hatch .
Yes, the multi batt connector did the edf slipped out/making bad contact. (gonna check it out now, anf fix )
Ruddr wheel function well, its actuated by the rudder anyway.

Gonna make a measured thrusttest when fixed connection.

 

[GrizWiz]

Cool!
Thanks

 

[leaded50]

thrust with only 2830 1300KV motor, 4s are approx. 11-1200g with 9050 prop. with EDF too... thrust pops up to approx 18-1900g.
Quite ok on a plane with total flying weight approx 1350g

 

[leaded50]

@GrizWiz , hang on a "short while".. uploading video of the hatch lock mechanism to Youtube..

here:

 

[leaded50]

was a bad connection in soldering on the bat. contact to the edf, now resoldered

 

[GrizWiz]

cool I bet you could use a zip tie for the loop and use and push rod wire for the lock

 

[leaded50]

cool I bet you could use a zip tie for the loop and use and push rod wire for the lock

its a thin ss rod, and a plastic tube to fit glued in where it slides, and a small part at end, after the "loop". Yes, could used a zip tie, made it by something else laying in front of me in stead ha,ha.. (its 20 steps to garage for zip tie... ?)

Think ive ordered 10 pcs or more hatchlocks from Asia, for 10 cents a pice approx.

 

[GrizWiz]

lol