Mikoyan-Gurevich I-250 (Mig - 13) Prop & EDF multipower

[leaded50]

let me see what i can do.

 

[GrizWiz]

Great!😉

 

[GrizWiz]

Here is version 1 of the plans

they are full size 30" by 20"

open in adobe reader and poster to plan them

 

[GrizWiz]

updated the fuse here are the new plans for it
Yay!!!!!!

 

[GrizWiz]

thinking about making this a prop only
Mighty mini

 

[leaded50]

updated the fuse here are the new plans for it
Yay!!!!!!

Thanks @GrizWiz

 

[GrizWiz]

Thanks @GrizWiz

Your welcome!!😉

 

[GrizWiz]

I'm going to start the build today!!

 

[GrizWiz]

I have been able to convert the plans to work with the mini power pod and a A and F power pack!!
24 inch wingspans here is the plans

 

[GrizWiz]

I have been able to convert the plans to work with the mini power pod and a A and F power pack!!
24 inch wingspans here is the plans

Testing skins for the mighty Mini version so far so good!!

 

[leaded50]

Testing skins for the mighty Mini version so far so good!!

nice, lets see how it goes!
30 - 50mm EDF should go in a miniversion?? hmm?

I got some trouble setup the propmotor and edf to be correct throttle, but switch for edf power function well . Wrecked the prop ESC so need wait for new ones who is big enough Amp comes. (i did know this one was questionable, but needed try... )

 

[GrizWiz]

nice, lets see how it goes!
30 - 50mm EDF should go in a miniversion?? hmm?

I got some trouble setup the propmotor and edf to be correct throttle, but switch for edf power function well . Wrecked the prop ESC so need wait for new ones who is big enough Amp comes. (i did know this one was questionable, but needed try... )

I put a 35mm edf in the plans!

 

[GrizWiz]

Working on getting the rudder and elevator slots put into the plans

 

[GrizWiz]

Don't start building off of the plans until later version comes out

 

[GrizWiz]

Finished the plane I decided not to put the edf in this version because it might be to heavy
I will be updating the plans today

 

[leaded50]

a tip for hatch.. use a layer of 2k epoxy glue at inside, when fastned in correct curbe till dry, and it will follow the fuselage shape, even without shape-suppoerters inside.

 

[GrizWiz]

Cool I just glued a little tab on the inside of the hatch
An more easy way could be to put formers on the hatch

 

[GrizWiz]

Updated the mighty mini plans will post soon.

The large version need updating in the fusalage

 

[leaded50]

taxi testing on how the mixed propusion functions..

 

[GrizWiz]

Looks like it works well
What mechanism did you use for the hatch.
The rudder wheel seems to turn great!
Were you having problems with the edf?