Reduced Mini Master Series T-28 Trojan (not ft) Built and Flown with Paint! $99 OBO

Mr Man

Mr SPEED!
This Foamboard Model has been tested and Flown, It has an Edge Racing Lite 2205 2480kv Brushless motor, 3 9g servos, a 40a 2-4s Brushless esc, and a 5x5x3 Prop. This plane uses a 850-1000mah 3s or 4s lipo (not included) And will need a receiver to complete as it’s a PNP. It does have a removable wing, but I would recommend glueing it on once received. This plane has a 29 Inch wingspan and can hit speeds of 65+mph.
With an upgraded power system, you might hit 80!

YOU WILL RECEIVE PLANE IN PHOTOS




 

Attachments

  • IMG_6356.jpeg
    IMG_6356.jpeg
    624.3 KB · Views: 0
  • IMG_6363.jpeg
    IMG_6363.jpeg
    2.2 MB · Views: 0
  • IMG_6380.jpeg
    IMG_6380.jpeg
    1.6 MB · Views: 0
  • IMG_6388.jpeg
    IMG_6388.jpeg
    2 MB · Views: 0
  • IMG_6400.jpeg
    IMG_6400.jpeg
    1.8 MB · Views: 0
  • IMG_6405.jpeg
    IMG_6405.jpeg
    1.3 MB · Views: 0
  • IMG_6419.jpeg
    IMG_6419.jpeg
    1 MB · Views: 0
Last edited:

Houndpup Rc

Legendary member
This Foamboard Model has been tested and Flown, It has an Edge Racing Lite 2205 2480kv Brushless motor, 3 9g servos, a 40a 2-4s Brushless esc, and a 5x5x3 Prop. This plane uses a 850-1000mah 3s or 4s lipo (not included) And will need a receiver to complete as it’s a PNP. It does have a removable wing, but I would recommend glueing it on once received. This plane has a 29 Inch wingspan and can hit speeds of 65+mph.

$123.99
YOU WILL RECEIVE PLANE IN PHOTOS

I can provide a video if wanted!
Great job!