quickqestion
Member
I thought I had my osd setup correctly but it is not displaying the actual osd at all. I do not have a gps connected as I mainly just want battery information so i set mine up slightly differently. I have a 5v and ground from the cc3d connected to the appropriate pins on the left side of the osd with the rest of the pins unused. and on the right side I have the video in and out, as well as a pass through for 12v in and out from the battery to my gimbal. I couldn't use the pass through from my camera to vtx as the camera only runs on 5v. The video is still displayed but there is no osd? I have already configured everything on my computer but still nothing. Do I have to use the Tx and Rx pins or something? Thanks,
the OSD i'm using:
https://www.amazon.ca/gp/product/B073QH9LB7/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
the OSD i'm using:
https://www.amazon.ca/gp/product/B073QH9LB7/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1