Nathan_116
Member
Hello FliteTest Community,
While cleaning out my dorm room I found a bunch of miniQuad parts that I no longer need. Here's what it entales.
1x RCX 250 frame(and all necessary hardware) (ZMR clone by MyRCMart) with 3d printed landing skids, 8mm spacer with programmable LEDs, 4 spare arms, 3d printed GoPro style Camera holder, RX and VTX holder. $25
1x MinimOSD board flashed with KVOSB I believe (with wires and 3d printed 30x30mm mounting board). $5
1x Diatone PDB with 5v and 12v output and XT60 Lead. $5
1x Flight Controller Vibration Dampening Mount. $5
....or, $35 shipped for the rest of lot
Any reasonable offer will be considered so don't be afraid to throw a number my way. Also, I will try and update this ad as things get sold. First Come First Serve!!
While cleaning out my dorm room I found a bunch of miniQuad parts that I no longer need. Here's what it entales.
1x RCX 250 frame(and all necessary hardware) (ZMR clone by MyRCMart) with 3d printed landing skids, 8mm spacer with programmable LEDs, 4 spare arms, 3d printed GoPro style Camera holder, RX and VTX holder. $25
1x MinimOSD board flashed with KVOSB I believe (with wires and 3d printed 30x30mm mounting board). $5
1x Diatone PDB with 5v and 12v output and XT60 Lead. $5
1x Flight Controller Vibration Dampening Mount. $5
....or, $35 shipped for the rest of lot
Any reasonable offer will be considered so don't be afraid to throw a number my way. Also, I will try and update this ad as things get sold. First Come First Serve!!
