We're building a mighty mini arrow, with the power pack F.
We've wired up the ESC to channel 3 on the receiver, and one of the servos to channel 1.
When I plug in the battery, the motor chirps. When I turn on our transmitter, the receiver's light goes on.
Adjusting the right joy stick moves the servo, so the transmitter is talking to the receiver.
Somehow during setup I managed to break something --- the throttle used to work, but while rewiring it to turn counter clockwise something went wrong. What I don't understand is how the motor manages to chirp but not turn.
We've wired up the ESC to channel 3 on the receiver, and one of the servos to channel 1.
When I plug in the battery, the motor chirps. When I turn on our transmitter, the receiver's light goes on.
Adjusting the right joy stick moves the servo, so the transmitter is talking to the receiver.
Somehow during setup I managed to break something --- the throttle used to work, but while rewiring it to turn counter clockwise something went wrong. What I don't understand is how the motor manages to chirp but not turn.