I am new to the hobby. We bought a cheap trainer with a togglable gyro. I am looking into venture into bugger airframes, so I built the FT Simple Storch. I bought the electronics from my local hobby store, assembled it, and subsequently crashed it. I have done some looking into the motor I bought and realized that is where my error was. The Storch has an 810kV minimum requirement, my E-flite park 400 has a rating of 740kV. It is the ELFM1300 instead of the ELFM1305. I have the recommended 10x5 prop, the recommended 3 cell 2200mAh lipo, and the recommended 30 amp ESC. Is there some change I can do to be able to use this motor or do I need to just buy a new one?