Hello everyone! I've been watching flite test and have been a fan for almost a year now, I would say. I've learned a ton from them, and was recently inspired enough to buy a power pack (c) and a TX/RX pair. Now, I've been trying for the last few days to get the main rotary motor to spin, but I just cannot get it to. I've verified that the transmitter is bound to the receiver correctly, servos will run off of all the channels, and probably most important, the throttle channel is 100% working. I've come to the conclusion that the motor must be damaged somehow, as it doesn't do a few of the startup beeps/noises that I was told to expect by flite test. I think I might have burnt it out by briefly connecting two of the leads to the battery directly, being a total moron, I know, but I have absolutely no experience here. I don't want to rush into buying a new motor because they're expensive, so can anyone tell me if I'm not doing something really obvious? I have all three leads from the motor connected to the corresponding bullet connectors on the ESC.
Component specifications:
3S1P 11.1V 2200 mAh 25C battery
FlySky FS-i6 transmitter
FlySky FSiA6B receiver
Other components contained in the power pack c
Appreciate any help, let me know if I need to explain something more, I'll be watching this thread by email
Component specifications:
3S1P 11.1V 2200 mAh 25C battery
FlySky FS-i6 transmitter
FlySky FSiA6B receiver
Other components contained in the power pack c
Appreciate any help, let me know if I need to explain something more, I'll be watching this thread by email