MS Bf-110 build & plans

CrshNBrn

Elite member
Thank you! These pictures are SO helpful- I don't have Fusion 360 to access the internal structure, so I was just using trial and error (and a lot of blue painters tape) to fit everything together.
 

Attachments

  • 20210214_201055.jpg
    20210214_201055.jpg
    753.8 KB · Views: 0

Whit Armstrong

Elite member
Thank you! These pictures are SO helpful- I don't have Fusion 360 to access the internal structure, so I was just using trial and error (and a lot of blue painters tape) to fit everything together.

Nice job! The nacelle boxes are in the wrong place, I'll post some pictures to show how it's done.
Screen Shot 2021-02-15 at 12.48.52 PM.png
Screen Shot 2021-02-15 at 12.49.17 PM.png

Make sure to glue the firewall directly onto the nacelle boxes, they aren't designed for a powerpod. I'm also going to design a firewall for this plane like the ones on the new mighty minis. That should be coming shortly.
 

Timmy

Legendary member
There's no hole in the top wing skins for all the wires coming from the nacelles and servos to enter/exit. Or is there and I'm just blind?I know there is one in the front of the wing but there needs to be one in between the nacelles.