KKArioKA
Epoxi Flyer
Hello friends !
So, winter finally caught up with this side of the World and I decided to take a walk at the Mall, of course i had a Evil Plan undercover: Pay a visit to this new Hobby Shop that opened at the referred mall.
Most of stuff was expensive, US$ 700,00 for a Aurora 9, some US$ 400,00 foamies i would buy for 100,00 at Hobby King and so on ...
But something caught my attention !!! the EASYGLIDER PRO (kit) at US$ 120,00 !!!!
I had to take it home before they adjust the price ! its almost the same price i would get at TOWER HOBBIES and i dont have to wait, pay for shipping and customs fees !
Here it is: the Kit is FLAWLESS !!
Now I must decide; do I want it as light as possible to become a thermal seeker or do I tune up following suit to my Bixler to Hot Rod Style / WarmLiner style with big motor and props ?
I still have some spares at home;
I have this KDA 22-15 spare from my QUAD with 30A plush esc. http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=2105&aff=583764
might try it with a 10x6 APC folding.
the recommended TUNING setup from multiplex site:
http://www.multiplexusa.com/model-kits/easy_glider_pro.html#
Motor Type:Brushless Out Runner
KV:1130
Watts:350
Size D x L:35 x 42 mm
Weight:134 g
So im inclined to order this with a 60A Plush:
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=16092&aff=583764
Also i might order some carbon strips to reinforce the wings, the horizontal stabilizer and a rod to embed into the fuselage.
Also i might want to try to MONOKOTE the wings as David W. did with his Blizzard to add some stiffness.
Any thoughts ???
Renato "KKArioKA"
So, winter finally caught up with this side of the World and I decided to take a walk at the Mall, of course i had a Evil Plan undercover: Pay a visit to this new Hobby Shop that opened at the referred mall.
Most of stuff was expensive, US$ 700,00 for a Aurora 9, some US$ 400,00 foamies i would buy for 100,00 at Hobby King and so on ...
But something caught my attention !!! the EASYGLIDER PRO (kit) at US$ 120,00 !!!!
I had to take it home before they adjust the price ! its almost the same price i would get at TOWER HOBBIES and i dont have to wait, pay for shipping and customs fees !
Here it is: the Kit is FLAWLESS !!
Now I must decide; do I want it as light as possible to become a thermal seeker or do I tune up following suit to my Bixler to Hot Rod Style / WarmLiner style with big motor and props ?
I still have some spares at home;
I have this KDA 22-15 spare from my QUAD with 30A plush esc. http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=2105&aff=583764
might try it with a 10x6 APC folding.
the recommended TUNING setup from multiplex site:
http://www.multiplexusa.com/model-kits/easy_glider_pro.html#
Motor Type:Brushless Out Runner
KV:1130
Watts:350
Size D x L:35 x 42 mm
Weight:134 g
So im inclined to order this with a 60A Plush:
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=16092&aff=583764
Also i might order some carbon strips to reinforce the wings, the horizontal stabilizer and a rod to embed into the fuselage.
Also i might want to try to MONOKOTE the wings as David W. did with his Blizzard to add some stiffness.
Any thoughts ???
Renato "KKArioKA"
Last edited: