Resource icon

MXS Profile 3d 1

Please log in to download

billyshaw22

Active member
I will get some of the mxs, but here is some of the slick 360 i just finished up, same exact construction.
 

Attachments

  • 273919759_742480110077948_6029302643612033488_n.jpg
    273919759_742480110077948_6029302643612033488_n.jpg
    98.5 KB · Views: 0
  • 275516195_386423706378241_818771483630404630_n.jpg
    275516195_386423706378241_818771483630404630_n.jpg
    89.2 KB · Views: 0
  • 276006314_1353465378460975_6579128111866828812_n.jpg
    276006314_1353465378460975_6579128111866828812_n.jpg
    94.6 KB · Views: 0

billyshaw22

Active member
Here are a few of one I’m building for my buddy, I’m doing a quick paint scheme on it as well.
 

Attachments

  • 61ADD595-F4DA-4AEA-BA44-CE5924CDF858.jpeg
    61ADD595-F4DA-4AEA-BA44-CE5924CDF858.jpeg
    1.1 MB · Views: 0
  • 07E8698B-F9A4-488C-9722-BD18E5A7767F.jpeg
    07E8698B-F9A4-488C-9722-BD18E5A7767F.jpeg
    1.4 MB · Views: 0
  • 5FA9C962-67F2-4079-BE8C-FADB0D743616.jpeg
    5FA9C962-67F2-4079-BE8C-FADB0D743616.jpeg
    1.3 MB · Views: 0
  • ED9C6CCD-F913-4E01-A0A6-C8B9ED2563F4.jpeg
    ED9C6CCD-F913-4E01-A0A6-C8B9ED2563F4.jpeg
    1.3 MB · Views: 0
  • CF122714-712C-40FD-9E9E-ACD8B66A5D6D.jpeg
    CF122714-712C-40FD-9E9E-ACD8B66A5D6D.jpeg
    1.4 MB · Views: 0
  • 48D3C5FF-4540-4A2F-A870-5D2FDE8A0101.jpeg
    48D3C5FF-4540-4A2F-A870-5D2FDE8A0101.jpeg
    1.4 MB · Views: 0
  • 7EBDDD74-A774-4494-B5ED-D862CCC1E4CA.jpeg
    7EBDDD74-A774-4494-B5ED-D862CCC1E4CA.jpeg
    1.1 MB · Views: 0
  • 0283120E-9354-45B5-BE0F-3212E2423FDB.jpeg
    0283120E-9354-45B5-BE0F-3212E2423FDB.jpeg
    1.4 MB · Views: 0
  • 15BD655B-C668-4DCA-A861-BCB24FC2CB60.jpeg
    15BD655B-C668-4DCA-A861-BCB24FC2CB60.jpeg
    1.1 MB · Views: 0

billyshaw22

Active member
When building, I designed it so all surfaces can be hinges before paint, makes paint easier and final assembly quicker, I will be using 1/8in round carbon spar and landing gear struts
 

Attachments

  • 79104CC1-521E-4E1F-9AB0-ABF23CEE2BCE.jpeg
    79104CC1-521E-4E1F-9AB0-ABF23CEE2BCE.jpeg
    1.2 MB · Views: 0
  • AB849A35-8AD3-413F-900C-E2542FAC6959.jpeg
    AB849A35-8AD3-413F-900C-E2542FAC6959.jpeg
    2 MB · Views: 0
  • C8E2A1B6-8331-4670-9874-407A0C3B9949.jpeg
    C8E2A1B6-8331-4670-9874-407A0C3B9949.jpeg
    2.1 MB · Views: 0
  • 3FF23FE2-CBBF-485F-95C5-C84CA8F7FAE8.jpeg
    3FF23FE2-CBBF-485F-95C5-C84CA8F7FAE8.jpeg
    1.3 MB · Views: 0
  • 64DF3E06-ECBA-411A-8607-F962D5193D9F.jpeg
    64DF3E06-ECBA-411A-8607-F962D5193D9F.jpeg
    1.1 MB · Views: 0
  • 445248E5-A34B-4FC8-B0FF-3F29360F9EC2.jpeg
    445248E5-A34B-4FC8-B0FF-3F29360F9EC2.jpeg
    2 MB · Views: 0

billyshaw22

Active member
Going to finish it up tomorrow, going to use 2- 8.5g flite test servos for elevator and rudder and 1 kst for ailerons and ft radial 2207-1750 and 30amp ft esc.
 

Attachments

  • 75042AAE-316F-474D-B6C6-2C7297AD878E.jpeg
    75042AAE-316F-474D-B6C6-2C7297AD878E.jpeg
    2.7 MB · Views: 0
  • FACE5D34-E110-401B-9F0D-92CF815DA286.jpeg
    FACE5D34-E110-401B-9F0D-92CF815DA286.jpeg
    2.5 MB · Views: 0
  • F40072DE-0228-4F0D-B5D0-086518E9A8E0.jpeg
    F40072DE-0228-4F0D-B5D0-086518E9A8E0.jpeg
    2.4 MB · Views: 0
  • 2AFACBE4-057C-43B3-9B41-0D59FB819286.jpeg
    2AFACBE4-057C-43B3-9B41-0D59FB819286.jpeg
    2.3 MB · Views: 0
  • 1B51E2A3-78AF-44E9-A2E7-C0F01DAD00C3.jpeg
    1B51E2A3-78AF-44E9-A2E7-C0F01DAD00C3.jpeg
    1.5 MB · Views: 0

BlockerAviation

Legendary member
Going to finish it up tomorrow, going to use 2- 8.5g flite test servos for elevator and rudder and 1 kst for ailerons and ft radial 2207-1750 and 30amp ft esc.
Dude that's an awesome airplane. Did you take the paper off or did you leave it? Looks like it may need a bit more carbon bracing but either way it should be a great little airplane. I've been scratch building airplanes like it but only in EPP because I need something that can take a hit lol. Here are a few I recently built, the red one is a raven and the blue is a gamebird, Both are a joy to fly.
IMG_20220121_235850124.jpg
 

billyshaw22

Active member
There will be foam supports on the bottom, I will take pictures of it when I get done, I took the paper off on this one to save some weight, it will be flown indoors. As far a strength, i have been flying this layout for about 11 years. my profile picture is the same materials and build techniques as this one and that was taken back in 2015, I just gave that exact airplane away to a local guy over this winter and it still fly's as good as it did when I first built it.
 

BlockerAviation

Legendary member
There will be foam supports on the bottom, I will take pictures of it when I get done, I took the paper off on this one to save some weight, it will be flown indoors. As far a strength, i have been flying this layout for about 11 years. my profile picture is the same materials and build techniques as this one and that was taken back in 2015, I just gave that exact airplane away to a local guy over this winter and it still fly's as good as it did when I first built it.
Ok the fuse aft of the wing is always the part that flexes the most. Like you said a foam support going down it would be perfect. I think I'll give the mx a shot. I really like how it reminds me of the airplanes flown at efest back when hobbico still existed lol.
 

billyshaw22

Active member
Efest was a blast, I miss it, wish there would be something like that again.
 

Attachments

  • 3FC182D7-BB9E-47C9-A0F3-4F7D779E1B4B.jpeg
    3FC182D7-BB9E-47C9-A0F3-4F7D779E1B4B.jpeg
    1.8 MB · Views: 0
  • 5A6477F4-E28F-4D70-915D-D2577B281C99.jpeg
    5A6477F4-E28F-4D70-915D-D2577B281C99.jpeg
    1.1 MB · Views: 0
  • 37B15132-E6F3-46E4-87AB-C85D4C85712C.jpeg
    37B15132-E6F3-46E4-87AB-C85D4C85712C.jpeg
    1.2 MB · Views: 0
  • 279B0596-03DD-41AE-ACC2-24772DEA486C.jpeg
    279B0596-03DD-41AE-ACC2-24772DEA486C.jpeg
    2.4 MB · Views: 0
  • 39A8E492-701D-479F-91DC-BEB1511E1545.jpeg
    39A8E492-701D-479F-91DC-BEB1511E1545.jpeg
    1 MB · Views: 0
  • DC60BE1A-399C-4951-B272-C63C33FE9B34.jpeg
    DC60BE1A-399C-4951-B272-C63C33FE9B34.jpeg
    2.5 MB · Views: 0
  • 3F4326F2-CD15-4285-A058-FA4C303E209C.jpeg
    3F4326F2-CD15-4285-A058-FA4C303E209C.jpeg
    1.4 MB · Views: 0
  • 6574875E-17AB-4AA1-A7A3-EC6B32933828.jpeg
    6574875E-17AB-4AA1-A7A3-EC6B32933828.jpeg
    1.3 MB · Views: 0
  • 8D5B2670-4A84-457D-A52C-96241B8AABB1.jpeg
    8D5B2670-4A84-457D-A52C-96241B8AABB1.jpeg
    1.2 MB · Views: 0
  • 21A4C331-CC6C-4E3E-AC5B-3CDC9C10C8EB.jpeg
    21A4C331-CC6C-4E3E-AC5B-3CDC9C10C8EB.jpeg
    2.1 MB · Views: 0
  • BF45D0D9-D24E-4BF7-8F59-90E593528A39.jpeg
    BF45D0D9-D24E-4BF7-8F59-90E593528A39.jpeg
    2.6 MB · Views: 0
  • B0DFD031-1229-4890-9CA2-1E93703750A1.jpeg
    B0DFD031-1229-4890-9CA2-1E93703750A1.jpeg
    1.3 MB · Views: 0