My Bixler2 FPV Platform

devilsfork

Junior Member
Here is my current FPV airframe, i am extremely happy with the overall performance :applause:

Setup:
PLANE: http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=27169
MOTOR: http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=12919
ESC: http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=12191
SERVOS: http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=16257
BATTERY: http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=8934

IMG_20121018_222727.jpg IMG_20121018_222749.jpg
IMG_20121018_222808.jpg IMG_20121018_222941.jpg
 

devilsfork

Junior Member
Thanks for the reply, and at the moment im getting 2km without an issue for the video however for the time being i wont push it too far with a helical as i do not know how far i can go with the FrSky system and that small patch. But i am planning on getting the storm OSD, 1w 2.4Ghz booster and a 5.8Ghz helical in the future so stay posted :)
 

Chris

Living the dream!
good looking plane there, I see you're on 2.4ghz control and 5.8ghz video... 2km is very respectable with that gear, well done mate.

your FPV canopy is very much like mine:

fpvpod.jpg

do you currently have an OSD?

StormOSD will be fantastic for you, the RTH function alone is worth the money, let alone you get a cracking OSD (CE OSD) too.

good luck with your FPV in the future
 

devilsfork

Junior Member
hehe yes ours look almost exactly the same :). Unfortunately I dont have an OSD (yet). I have a CE OSD on the way along with chainlink UHF :). I looked at your set-up and it looks awesome. Your airframe is (prepared) better though. And good luck with further FPV adventures.
 

Nonamerc

Arman
Chainlink is not a really good UHF system... I would buy an EZuhf because it's much better. But it's your choice! 15Km with chainlink is not going to be easy....